PREFACE
Note:
On the completion of this User Guide, thanks all FlashForge engineers and the FlashForge 3D printer users for their
unremitting efforts and sincere assistance.
The FlashForge Creator 3 User Guide is designed for the Creator 3 users to start their printing journey with FlashForge
Creator 3. Even if you are familiar with earlier FlashForge machines or 3D printing technology, we still recommend that
please read this guide, as there is lots of important information about the Creator3 for you to get a better 3D experi-
ence.
For a better and more successful printing experience, you can refer to the following materials:
(1) User Guide:
Users will find the User Guide together with the printer accessories. The User Guide will help you start your print journey
as soon as possible.
(2) Official FlashForge Website:
FlashForge Chinese website：www.sz3dp.com
FlashForge English website：www.flashforge.com
The official FlashForge website contains the up-to-date information concerning FlashForge software, firmware, device
maintenance and so on. Users are also able to get the contact information from there.
Each device must be tested before leaving factory. If there are some residues in extruder or some tiny scratch
-
es on the build tape, it is normal and won’t affect the printing quality.
NOTICE
Keep your work place tidy.
Do not operate Creator 3 in the presence of flammable liquids, gases or dust.
Keep Creator3 out of children and untrained persons' reach.
PLEASE STRICTLY FOLLOW ALL THE SAFETY WARNINGS AND NOTICE BELOW ALL THE TIME.
WORK ENVIRONMENT SAFETY
Always use the Creator3 with a properly grounded outlet. Do not refit Creator3 plug.
Do not use Creator3 in damp or wet locations. Do not expose Creator3 to burning sun.
In case of device damage, please use the power supply provided by FlashForge.
Avoid using the device during an thunderstorm.
In case of uncertain accident, please unplug the device if you do not use it for long.
ELECTRICAL SAFETY
Do not touch the nozzle and build plate during printing.
Do not touch the nozzle after finishing printing.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.
Do not operate the device while you are tired or under the influence of drugs, alcohol or medication.
PERSONAL SAFETY
01
