[Tools]-[Setting]
Tap [setting]to enter setting interface
1.
Language:
To set the display language;
2.
Wi-Fi:
To turn on/off the Wi-Fi;
3.
WLAN hotspot:
To turn on/off the WLAN hotspot;
4.
FlashCloud:
turn off/on Cloud connection;
5.
Door Opened Pause:
To turn on/off the Door Opened Pause;
6.
Door Opened Remind:
To turn on/off the Door Opened Remind;
7.
Startup Sound:
To turn on/off the startup Sound;
8.
Left Filament Check:
To turn on/off the filament check on left extruder;
9.
Right Filament Check:
To turn on/off the filament check on right extruder;
10.
Calibration:
To adjust the initial distance between the extruder and the build plate;
41
[Tools]-[Manual]
Tap[Manual],enter manual adjustment mode:
1.
Y+:
The extruder moves to the zero point, that is, the back of the machine;
2.
Y-:
The extruder moves to the direction opposite to the Y+;
3. The left extruder moves to the zero points, that is, to the right direction;
4. The left extruder moves to the direction opposite to the X+;
5. The right extruder moves to the zero points, that is, to the left direction;
6. The right extruder moves to the direction opposite to the X+;
7. The build plate descends;
8. The build plate elevates.
