21
Deviation of two straight line
Two straight lines coincide
3. If two lines coincide completely,tap[Yes],X axis calibration completed.
2. If two lines coincide completely,tap[Yes],Y axis calibration completed.
3. If two lines not coincide completely,tap[No],adjust extruder position according to actual situation.After adjustment
completed,clean filament on the build plate,tap[Recalibration];Repeat step1 and step2 until two printed lines coincide.
1. Tap[Y axis calibration],wait for two extruders heating up to the target temperature, two extruders print one line in
turns.After printing completed,check if two lines coincide; In the meanwhile, a confirmation notice pops up.
[Y axis calibration]
By comparing if printing lines of two extruders coincide in the direction of Y axis to judge if two extruders in the same
Y axis.
R
L
R
L
Please click the icon as shown in the picture and
adjust the nozzle with the left nozzle as the indicator.
Estimate the deviation.Enter the estimated value and
click "recalibrate";Repeat the above steps until the
two lines coincide.