Do not leave the device unattended for long.
Do not make any modifications to the device.
To lower the build plate before loading/unloading filament. (The distance between the nozzle and build plate
should be kept for at least 50mm)
Operate the device in a well-ventilated environment.
Never use the device for illegal activities.
Never use the device to make any food storage vessels.
Never use the device to make any electrical appliance.
Never put the model into your mouth.
Do not remove the models with force.
Never connect the device with network cable longer than 3m.
CAUTIONS
Temperature: RT 15-30℃
Moisture: 20%-70%
ENVIRONMENT REQUIREMENTS
The device must be placed in a dry and ventilated environment. The distances of the left, right and back side space
should be at least 20cm, and the distance of the front side space should be at least 35cm.
PLACE REQUIREMENTS
All polymers degrade with time. Do not unpack until filament is needed. Filament should be stored at clean and dry
conditions.
FILAMENT STORAGE
Do not abuse the filament. Please make sure you use the FlashForge filament or the filament from the brands
accepted by FlashForge.
FILAMENT REQUIREMENTS
All the information in this document is subject to any amendment or change without the official authorization from
FlashForge.
FLASHFORGE CORPORATION MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS DOCUMENT, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRATIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
FlashForge shall not be liable for errors contained herein for incidental consequential damages in connection with
furnishing, performance or use of this material.
Flashforge reserves the right to modify the User guide due to subsequent equipment updates.
Copyright © 2019 FlashForge Corp. All Rights Reserved
LEGAL NOTICE
02