manualshive.com logo in svg

FLASHFORGE 3D PRINTER Creator X, Startup Manual, Page: 2 / 26

Share
Download
FLASHFORGE 3D PRINTER Creator X Startup Manual Download Page 2

Should you encounter any problems, please feel free to email me at: [email protected] 

 

1 

 

 

 

Creator X Start-up Guide 

 

Contents 

Precautions: .......................................................................................................................................... 1

 

Please always check power setting before plug in ............................................................................... 1

 

What's in the box? ................................................................................................................................ 1

 

Unboxing .............................................................................................................................................. 2

 

Initial Hardware Installation ................................................................................................................ 3

 

Special Notes to Win8 users before Software Installation ................................................................... 6

 

Software Installation ............................................................................................................................ 6

 

Explanation of GCode Settings .................................................................................................... 7

 

USB connection & setting the extruder and platform temperature. ................................................... 10

 

Feeding and withdrawing filament .................................................................................................... 14

 

Setting the filament up ............................................................................................................... 15

 

Feeding using the LCD screen ................................................................................................... 15

 

Withdrawing using the LCD screen ........................................................................................... 16

 

Feeding using the Replicator G control panel ............................................................................ 17

 

Setting parameters .............................................................................................................................. 18

 

Level Build Plate before initial print

 .............................................................................................. 18

 

Initial print.......................................................................................................................................... 19

 

Dual Extruder print ............................................................................................................................ 21

 

Summary of Contents for Creator X



























Reviews:

No comments