Should you encounter any problems, please feel free to email me at: [email protected]
21
for the required modification. First select Gcode in the red box shown below and then change
M109
S110 T0
to
M109
S115
T0
.
After modifying, click the file button to save the sample and click the left most button on the green
bar near the top of the screen.
The Gcode has now been sent to the printer and the object will start printing shortly.
Dual Extruder print
To use the two-color printing that comes with the Replicator G software, open it up and select
Gcode
>
Merge .stl for Dual Extrusion
.