Should you encounter any problems, please feel free to email me at: [email protected]
3
Remove the cardboard packing material and take the
accessory box
from the printer, set it aside for
later.
The build platform should now be visible. It is an aluminum plate covered in a thin polyamide film.
This is the surface that your objects will be printed on.
Remember: Do not remove the film.
The next step is to raise the build platform; there are two ways to do this:
1) Turn the screw which is behind the rotating platform.
2) Grasp the printing platform with one hand on each side, raising it slowly and keeping it level.
Stop once the platform is just shy of the bronze nozzle.
Now you should be able to see underneath the build platform, you'll find the filament here; it’s
easiest to remove the filament by setting aside the remaining packaging material.
After that, cut off the ties between the X axis and front metal frame.
You have now finished un-boxing! The next task is to set up the hardware.
Initial Hardware Installation
Start by installing the extruder. You'll need the two shortest silver screws from the kit found in the