35 |
P a g e
OPTIONAL BLOWER KIT FOR SCREENED UNIT
The Flare silent blower kit ships standard on all Double Glass units, keeping the glass cooler to the touch,
but can also be added to a safety screened unit to circulate more heat from the front of the fireplace into
the room.
On a Flare screen unit, the blowers will be installed and delivered with an 110V Plug. The operation of
the blowers is controlled with a power ON/Off to the outlet they are connected to.
The customer has the option to:
•
Install a smart outlet to control the blowers
•
Use a wall switch to start & shutdown the blowers whenever they want. An electrician will need
to wire the wall switch to control the power to the fireplace fans.
•
Buy a remote system for the outlet.
Please note that the blowers will need air intake to work. (Same requirements for double glass) For
reference to the air intake specifications for your unit please see pg. 74 of Flare Install Manual.
Summary of Contents for Flare Corner Right & Left 30-100"
