31 |
P a g e
LED LIGHTS
The Flare Fireplace can be ordered with optional multi-color interior RGB LED lighting. The lights allow perfect flames to be
viewed across a bed of illuminated crushed glass, or any other direct vent approved media option.
RGB LED
–
The multi colored option is controlled by a remote for the color selection. Once the color has been selected by the
operator, the LED memory will remember that color for the next time the unit is turned on.
LED Operation:
Option 1
–
Double Glass unit
•
LED power is connected to the Flare control system (Labeled in
picture above as LED Power Outlet, and below as
Connection C
)
•
LED will turn On and Off with the fireplace, controlled by the
fireplace remote or wall switch.
•
Color control can be done by the LED remote.
•
Once a color is selected, the LED remote can be stored away.
•
LED to be switched Off when fireplace is turned off.
•
LED cannot be switched on when fireplace is off.
Option 2
–
Screen or Double Glass
•
LED can be connected to independent power source, home automation system or smart outlet.
•
LED can be turned ON/OFF from LED remote, independent from the fireplace.
•
LED can be turned on, even when fireplace is off.
Summary of Contents for Flare Corner Right & Left 30-100"
