OPERATING INSTRUCTIONS DESCRIPTION
16” OSCILLATING PEDESTAL FAN WITH REMOTE CONTROL
MODEL NO.: 13-07009
Thank you for purchasing this high quality fan.
00161-11/29/04
VERSO
READ AND SAVE THESE INSTRUCTIONS
• Use this fan only as described in this manual. Other use not recom-
mended may cause fire, electric shock or injury.
• This product is intended for household, industrial and commercial use
ONLY. It is not intended for outside use.
• High velocity fans are designed to create rapid air movement; there-
fore, make sure the fan is not placed near drapes, curtains, or any
objects that may be drawn into the fan inlet.
• This fan requires a grounded 120 volt power source (3 prong recep-
tacles). NEVER connect the fan to any power source other than a
120 volt alternating current polarized outlet.
• To protect against electric shock, do not immerse unit, plug or cord
in water or spray with liquids.
• This fan is equipped with a polarized alternating current line plug (a
plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact an electrician to replace the
obsolete outlet. Do not defeat the safety purpose of the polarized plug.
• Close supervision is necessary when any appliance is used by or
near children.
• Unplug the fan from the outlet when not in use, when moving fan
from one location to another and before cleaning.
• Do not operate the fan in the presence of explosive and/or flammable
fumes.
• Do not place the fan or any parts near an open flame, cooking or
other heating appliance.
• Do not operate the fan with a damaged cord, plug, after a malfunc-
tion or if dropped or damaged in any manner. (See warranty).
• Avoid contact with moving fan parts.
• To disconnect, grip the plug and pull it from the wall outlet. Never
yank the cord.
• Always use on a dry, level surface.
• Do not hang or mount fan on a wall or ceiling.
• Do not operate if the fan housing is removed or damaged.
• Do not operate without fan grilles properly in place.
• A loose fit between the AC outlet and plug may cause overheating of
the plug. Have a qualified electrician replace the outlet.
• WARNING: To reduce the risk of fire or electric shock, do not use
this fan with any solid state speed control device.
PARTS DIAGRAM
Assemble correctly by the following orders before using.
1. The stand assembly
2. The whole assembly
1) Front guard
2) Guard clops screw
3) Guard clops
4) Guard ring
5) Blade fastening nut
6) Fan blade
7) Guard fastening nut
8) Rear guard
9) Motor central shaft
10) Grease shield
11) Front shell
12) Rear shell
13) Oscillate control knob
14) Timer
15) Control switch
16) Fastening screw
17) Adjustable electroplated shaft
18) Decorative pipe
19) Standing shaft
20) Standing rack
21) Standing plate
22) Remote control
23) Fixing screw
• Screw the iron plate (21) out of
the standing shaft in anti-clock-
wise direction.
• Put the standing shaft (19) into the
stand.
• Screw the iron plate (21) firmly
from the bottom of the stand in
clockwise direction and assemble
the standing shaft and the stand
well.
• Link the fan main body and the stan-
ding shaft (19) together with the
fixing screw (16) and then fix them.
• Loosen the fixing screw (16) and
pull the electroplated pipe (17) to the
height needed and then fix it firmly.
• Screw the blade fastening screw
(5) clockwise, then screw the guard
fastening screw (7) anti-clockwise.
• Fix the rear guard into the front shell
(11). Adjust pins from the shell into
the guard.
• Screw tightly the guard fastening
screw (7) clockwise.
Put in
Completing
3. Rear guard assembly
ASSEMBLY METHODS
21
23
