flamco Vacumat Eco 300, Installation And Operating Instructions Manual

Page: 18 / 388

TemplateA4_v20130506
18
Menu item 9: Start-up menu Only available as long as it has not yet been fully processed, for example,
after initial commissioning or resetting the Start menu in the "Configuration".
Read the instruction manual 9-1:. → Read and acknowledge.
Degassing modes 9-4: → Choose between fully automatic and standby.
Control type 9-5: → pressure-controlled, externally-controlled or top-up OFF
see also Top-up section.
Pressure settings 9-6: → Edit pressures in the diagram.
START 9-7:
→
Trigger system START; jump to operating display 1.
(The commissioning time is also logged.)
Menu item 10: Operating menu 3 screens - see Appendix 3 - Menu structure overview.
Menu item 11: Service
Menu item for reading information about the control unit and the operation
already performed and faults.
Order number 11-1 →
Order number / Date / Time / Input code level.
System info 11-2: →
11-2-1 System ID / type
→ 11-2-2 Degassing mode
→ 11-2-3 Control type
Version information 11-3: → 11-3-1 Control unit software / hardware
→ 11-3-2 Terminal software / hardware
→
11-3-3 Database
→ 11-3-4 Bootloader
→
11-3-5 Language file
→ 11-3-6 Version of any modules fitted in SLOT 1
→ 11-3-7 Version of any modules fitted in SLOT 2
Commissioning 11-4: Date commissioning / time / code level during commissioning.
Maintenance 11-5:
11-5-1 Due date or comment
about the performed
maintenance 1
11-5-2 Due date or comment
about the performed
maintenance 2
11-5-3 Reset treatment
Recurring device test (1 year).
Recurring electrical test (1.5 years).
Reset processing capacity date / time / code level.
History 11-6: →
Fault code / Fault / Date / Time of occurrence (up to 100 faults can be
traced).
Operating times 11-7:
→
Motor pump / motor ball valve / pressure switch / degassing total since
commissioning.
Top-up 11-8: → Top-up amount / top-up time / top-up list / processing.
* Flamco will not accept any liability for the consequences of incorrect parameterisation.
It may sometimes be necessary to first edit a pressure value other than the intended one so that the actual value to be
changed receives enough space so that no implausibilities arise that could prevent system operation.