11
SoftTouch
masks have an outer edge made of
soft
biocompatible material
that ensures excellent ad-
herence to the face, and is also equipped with an
innovative Dispersion Limiting Device
.
These dis-
tinctive elements that distinguish it allow greater
sedimentation of medication in the patient and also
limit dispersion
.
During the inspiratory phase, the
tab
, acting as a
Dispersion Lim-
iting Device
, bends inwards to-
wards the mask
.
During the expiratory phase, the
tab
, acting as a
Dispersion Limit-
ing Device
, bends outwards from
the mask
.
HOW TO USE THE “RF7 DU
A
L SPEED” NE
B
ULIZER WITH THE SPEED SELE
C
TOR
Professional and fast, this device is suitable for administering all types of medications,
including more expensive ones,even in patients with chronic diseases
.
The geometry
of the internal lines of the RF7 Dual Speed nebulizer ensures the ideal granulometry for
active treatment all the way down to the lower respiratory tract
.
To speed up the inhalation therapy, move the speed selector button
(
C
1
.4
) by pressing on M
A
X with your finger
.
To increase the effectiveness of the inhalation therapy, press with your
finger on the wording MIN of the speed selector (
C
1
.4
)
.
In this position,
the speed selector acts as a valve and allows nebulizing the optimal
amount of drug to the lower respiratory tract, reducing its dispersion in
the environment
.
SOFTTOU
C
H F
AC
E M
A
SKS
Soft
biocompatible
material
Dispersion
Limiting Vent
3.
C
onnect accessories as indicated in the “
C
onnection
diagram” on the cover
.
4.
Sit comfortably holding the nebuliser in your hand, place
the mouthpiece onto your mouth or alternatively use the
nose piece or mask
.
Should you opt for the mask accessory,
place it on your face as shown in the picture (with or
without using the elasticated strap)
.
5.
Turn on the device using the switch (
A
1) and then breathe
in and exhale deeply
.
6.
When the treatment is finished, shut off the device and
unplug the power cord
.
W
A
RNING:
If after the therapy session moisture accumulates in the tube (B), remove the
tube from the nebulizer and dry it using the device’s compressor fan; this operation will
prevent mold from forming inside the tube
.
