EN
14
WARNING – Danger of Burns
From Battery Acid!
■
Batteries can be deadly if swallowed.
Batteries should be kept out of the
reach of children and animals. If a bat-
tery is swallowed, immediate medical
attention must be sought.
■
If a battery leaks, do not allow your
skin, eyes and mucous membranes
to come into contact with the battery
acid. Wear protective gloves if neces-
sary. If you touch battery acid, rinse
the a
ff
ected areas with abundant clear
water straight away and seek medical
assistance immediately.
NOTICE – Risk of Damage to
Material and Property
■
Do not expose the training device to
extreme temperatures, strong temper-
ature
fl
uctuations, persistent moisture
or wet conditions, direct sunlight or
impacts.
■
Always protect the expander bands
from sunlight in order to avoid discol-
ouration and damage to the material.
Assembling the Training
Device
PLEASE NOTE!
■
Protect the
fl
oor, carpet etc. with a
mat or something similar before the
component parts are removed from
the box and also during set-up and
training.
Read through the assembly instruc-
tions carefully before assembling the
training device. The sequence of work-
ing steps described must be followed
exactly.
Assembly Materials
• 4
x
fl
at-head screw (M8 x 62 mm)
• 2
x
fl
at-head screw (M8 x 45 mm)
• 6 x hexagon socket screw
(M8 x 40 mm)
• 2 x hexagon socket screw
(M8 x 35 mm)
• 2 x cross-head screw (M5 x 10)
• 2 x spring washer (M8)
• 4 x cap nut (M8 x 62)
• 5 x nut (M8 x 62)
• 8 x washer, curved (M8)
• 5 x washer, straight (M8)
• 1 x frame locking screw
• 1 x seat height adjusting screw
• 1 x spanner (13 – 15)
• 1 x hex key (5 mm)
Assembly
1. Lay out all individual parts carefully on
a
fl
at
fl
oor.
2. Carefully unfold the bicycle frame (
1,
14
) and secure the position of the
connecting axle (
25
) with the locking
screw (
24,
9
) (
Picture D
).
3. Screw the feet (
2,
12
, 3,
10
) onto
the bottom of the bicycle frame (
1
,
14
). Use the corresponding
fl
at-head
