4-7
Section 4
Operation
Enter/Terminate
Configuration Mode
(continued)
(2) Or turn the control knob clockwise until you get the following ESC
display and then push it to confirm the termination as shown below:
• Note also that the configuration mode is automatically terminated if
there is no button operation for more than 20 seconds.
Check Configuration
Settings
As mentioned earlier, the default configuration settings are as follows:
Display
Default Setting
Heating Mode
type
Temperature Priority Mode [t]
Temperature Unit
unit
Celsius [Cels]
Timer Mode
time
Immediate Timer Activation
[ti1]
Temperature Offsetting
offS
0.0
℃
Maximum Heating Rate
LiMt
100% [100]
High Temperature Limit
t-h
350.0
℃
Low Temperature Limit
t-L
0.0
℃
Temperature Control Mode
CoEF
Optimal [Opti]
You can check the current configuration settings as follows:
(1) Press the CONFIG Button and select the configuration checking
mode [LiSt] shown below by turning the Control Knob:
