819091D
72
PROBLEM Possible
Causes
What To Do
No Display
Lights
Power/control
module
no power
Check harness and plugs on module harness at both
ends
Check wiring connections on display board
Refrigerant
Noise
Popping farting
Capillary may not be fitted into evaporator causing
vibration.
Gurgling whistling
Check alignment of capillary and apply sound
dampening tape
PC Light Not
Functioning
Blown bulb
Check power supply to socket 7Volts, if nil check plug at
display module
Check continuity of bulb, nil replace
Reed Switch
Check reed switch is working by using a magnet
Place the product in I/O mode can also check reed
switch operation.
Poor connection
Spread halogen bulb legs
Lamp holder, replace where possible
Connector on display module
Noisy Fan PC
Ice around gasket
Replace assy with new fan kit
Wires touching
Tuck wires away from fan blade
Faulty fan replace
assy with new fan kit
Fit replacement
Noisy Fan FC
Ice on cover
Clear ice off cover and check doors are sealing
Ice on grill
Clear ice off grill and check doors are sealing
Fan off mountings
Refit
Wires touching
Tuck wires away from fan blade
Capillary touching
Shift capillary from fan area make sure it is not touching
any part of the cabinet
Fan motor noisy
Fit replacement
Wires too tight
Re route wiring
Ice Build Up In
Compartment
Doors
sealing
Check
gaskets sealing, adjust gaskets
Fit drain valve to drain tube
Not
Dispensing
Water
Dispenser
Check the PC doors are closed
Check dispenser connections
Check if 12-volt supply is at the dispenser.
Check resistance of water valve
Check for 12 volt supply at water valve
Check water filter and Pressure reducing valve.
