819091D
54
12.4.8
Removing Water Tank
•
Turn the water off at source.
•
Remove all shelves.
•
Remove the PC duct cover and PC Sensor from duct cover
•
Unclip the water reservoir cover from the cabinet liner.
•
The reservoir is removed by sliding a flat bladed plastic putty knife or spatula on top of the tank, and
with a folding motion of the spatula, lever the tank lip from the LH side to the RH side until clip is lifted
from liner and the tank is removed.
Diagram A
– tank in position
Diagram B
Fit spatula on the
RH side of lip and move to RH
side until unclipped.
Diagram A
Diagram B
•
Remove water tubes from tank.
Hoses are accessible once tank is removed.
12.4.9 Refitting
Water
Tank
•
Place the bottom section of the tank onto protrusion on PC liner (Refer Diagram C and D)
Diagram C
Diagram D
•
Push the tank towards the rear of the liner until top lip is clipped into position.
•
Refit cover (as per Diagram E).
