Fisher & Paykel ICON, Use And Care Manual, Page: 9 / 19

A - 8
2. F&P ICON MENU SYSTEM (continued)
13i
13 i . Flight Mode
Flight Mode allows for the device to operate on a reduced power ( 75 W).
Situations for use in this mode might include long-haul air flights and
camping.
NOTE: Humidity output will be significantly reduced in this mode and is
not recommended for long-term use.
• Turn the SmartDial to the Flight Mode setting and press to enter.
Turn to select On or Off and press again to accept the change.
• The Flight Mode symbol will be displayed continuously on the
Home Screen while the Flight Mode is activated.
NOTE: If you are intending to use your CPAP during flight, confirm with
your airline for F&P ICON approval prior to travel.
13ii
13 ii . Display Pressure
The Display Pressure setting provides two display options for the Home
Screen. Time is the default setting, however this can be changed to
show pressure (cmH
2
O or hPa) if required.
• Turn the SmartDial to the Display Pressure setting and press
to enter. Turn to select On or Off and press again to accept the
change.
• If a different unit of measure is required, press the SmartDial and
hold for 3 seconds. Turn the SmartDial to select either cmH
2
O or
hPa and press again to accept the change.
13iii
13 iii . Altitude Adjustment
• For models without automatic Altitude Adjustment, turn the
SmartDial to the Altitude setting and press to enter. Turn the
SmartDial to select the Altitude level from
0 to 9 , 000 ft and press to
accept the change.
• To choose meters, press the SmartDial and hold for 3 seconds while
at the Altitude Adjustment setting. When the symbol starts to flash,
turn to select meters and press to accept the change. Press the
SmartDial again to enter the menu and turn to adjust to the desired
Altitude level. Press again to accept the change.