
A - 4
A - 5
ENGLISH
Advanced Mode
The
Advanced Mode
is a menu system for users that provides additional features which are not
available in Simple Mode. (
Note: This mode may be restricted by your healthcare provider.)
4
4
. On/Off and Ramp
• A quick press to the SmartDial will start therapy.
• To activate Ramp, press the SmartDial again and hold for
3
seconds.
The Ramp symbol will appear
.
5
5
. Humidity
• To control the level of humidity delivered to the mask, turn the
SmartDial to the Humidity setting . Press to enter and turn the
SmartDial again to select the desired humidity level from
0
(off) to
7
(maximum). Press again to accept the change. For example, if the air is
feeling too cold increase the Humidity setting in increments of
1
or
2
over
2
to
3
nights until you find the level that is comfortable.
NOTE: The default setting is Humidity level
4
. If using without water, set
the humidity level to
0
. The humidity level cannot be adjusted if Flight
Mode is set to on.
• The Boost control offers three additional levels (
1, 2, 3
) to optimize
the Humidity setting. Press and hold the SmartDial for
3
seconds while
in the Humidity setting and the Boost symbols will appear. Turn
to select low (
1
), medium (
2
) or high (
3
) and press again to accept
the change.
CAUTION: The Boost control should only be used in extreme situations
when experiencing symptoms from your CPAP therapy. The default
Boost setting (medium) will be suitable for most patients.
6
6
. Alarm On/Off
• Turn the SmartDial to the Alarm setting
, press to enter, then turn to
select either On or Off . Press again to accept the change.
• If Alarm On
is chosen, turn the SmartDial to select either the default
bell or the music symbol for AlarmTunes™ , and press again to
accept the change.
• Press the SmartDial once to snooze the Alarm for
10
minutes, twice to
turn the Alarm off and a third time to discontinue therapy.
NOTE: The AlarmTunes symbol is only visible when the InfoUSB™ is
inserted. F&P Studio™ software is required to utilize the AlarmTunes
feature.
Summary of Contents for ICON
Page 1: ...Use and Care Manual ...