Fisher & Paykel ICON, Use And Care Manual, Page: 5 / 19

A - 4
2. F&P ICON MENU SYSTEM
Simple Mode
The Simple Mode is the default Menu System of the F&P ICON.*
* Not in all models
1
1 . On/Off and Ramp
• A quick press to the SmartDial will start therapy.
• To activate Ramp, press the SmartDial again and hold for
3 seconds. The Ramp symbol will appear .
2
2 . Humidity
• To control the level of humidity delivered to the mask, turn the
SmartDial to select the desired humidity level from 0 (off) to 7
(maximum). Press again to accept the change. For example, if the air is
feeling too cold, increase the Humidity setting in increments of
1 or 2
over 2 to 3 nights until you find the level that is comfortable.
NOTE: The default setting is Humidity level 4 . If using without water, or
where low power consumption is required (e.g. for aircraft and trucking
use), set the humidity level to
0 .
3
3 . Sleep Data
Press and hold the SmartDial for 7 seconds to access the Sleep Data
setting. Turn the SmartDial to scroll through each of the following
statistics:
• Total Compliant Hours .
• Average Compliant Hours over the last 30 nights . Press the
SmartDial to access the average for the last 7 nights and again for the
last night.
• Percentage of nights used greater than 4 hours over the last 30 nights
. Press the SmartDial to access the percentage for the last
7 nights.
• The number of nights elapsed since therapy commenced .
• Check Sum .
• Exit the Sleep Data setting.
NOTE: A symbol will appear on the Home Screen once the compliance
requirements have been achieved for the North America models only.