A - 6
2. F&P ICON MENU SYSTEM (continued)
• If AlarmTunes is selected, turn the SmartDial to select the desired music
track (from
1
to
5
, depending on how many songs are loaded onto the
InfoUSB), or if there are two or more songs loaded select Auto for shuffle
and press again to accept the change. Refer to the F&P Studio CD for
instructions to install and transfer music to your InfoUSB.
7
7
. Alarm Time
• Turn the SmartDial to the Alarm Time setting
and press to enter.
Turn the SmartDial to select the hour; press to accept. Turn to select
the minutes and press again to accept the change.
8
8
. Alarm Volume
• To adjust the volume of the alarm, turn the SmartDial to the Alarm
Volume setting and press to enter. Turn the SmartDial to adjust the
volume from quiet to loud and press again to accept the change.
• To adjust the “click” volume of the SmartDial, press and hold for
3
seconds while in the Alarm Volume setting. The Volume symbol
will be present; turn to select the desired volume and press again to
accept the change.
9
9
. Clock Time
• Turn the SmartDial to the Clock Time setting
and press to enter.
Turn the SmartDial to select the hour, minutes,
12
-hr or
24
-hr time.
After each selection, press again to accept the change.
10
10
. Brightness
• Turn the SmartDial to the Brightness setting
and press to enter. Turn
the SmartDial to select the desired Home Screen Brightness and press
to accept the change.
• To adjust the Active Screen Brightness, press and hold the SmartDial
for
3
seconds and the Device symbol will appear .
NOTE: The Home Screen Brightness controls the level of light emitted
by the LCD when the device is in “stand-by” or “pressure on” mode, and
the Active Screen Brightness controls the level of light emitted by the
LCD whilst navigating the Menu System.
Summary of Contents for ICON
Page 1: ...Use and Care Manual ...