Fisher & Paykel ICON Use And Care Manual Download Page 16

A - 14

A - 15

ENGLISH

Static Pressure Stability

Auto/Premo

Novo

Pressure change (cmH

2

O) at connection port at a  

pressure setting of 

10

 cmH

2

O

0

.

2

0

.

4

Humidity

With ThermoSmart Breathing Tube

Maximum Humidity

36

 mg/L Body Temperature and Pressure Saturated (BTPS), 

82

% RH at 

10

 cmH

2

O, with 

Humidity level 

7

 and Boost level high.

Typical Humidity

24

 mg/L (BTPS), 

90

% RH at 

10

 cmH

2

O, with Humidity level 

4

 and Boost level medium.

With Standard Breathing Tube

Maximum Humidity

32

.

24

 mg/L, 

73

.

21

% RH at 

10

 cmH

2

O with Humidity level 

7

 and Boost level high.

Typical Humidity

17

.

97

 mg/L, 

85

.

88

% RH at 

10

 cmH

2

O with Humidity level 

4

 and Boost level medium.

Electrical Ratings

Rated Supply Voltage 

Rated Current Input

Rated Supply Frequency

100

 - 

115

 V

1

.

27

 A (

1

.

43

 A Max)

50

 - 

60

 Hz/

400

 Hz

220

 - 

240

 V

1

.

07

 A (

1

.

21

 A Max)

50

 - 

60

 Hz

GAS TEMPERATURES: 

Maximum = 

100

 °F (

38

 °C) 

NOISE LEVEL: 

Sound Pressure Level <

29

 dBA 

Average Sound Power Level <

37

 dBA

WATER CHAMBER VOLUME: 

420

 mL up to the maximum fill line

STANDARDS COMPLIANCE: 

IEC

60601

-

1

1988

 + A

1

 & A

2

; AS/NZS 

3200

.

1

.

0

1998

 EN

60601

-

1

1990

 + A

1

-A

2

; UL

60601

-

1

2003

DATA RECORDING:

 

The InfoUSB records up to 

365

 days of summary efficacy data,  

7

 days of detailed efficacy data (AHI, Leak), Pressure and Leak data  

(

50

 Hz), as well as cumulative data from first use. The device memory can 

also record up to 

365

 sessions of summary data or up to 

200

 sessions 

(

400

 hours) of detailed efficacy data.

STORAGE AND TRANSPORT:

  The device should always be stored and transported within the following 

temperatures:

 

Transport:

  

14

 to 

140

 °F (–

10

 °C to 

60

 °C)

 

Storage:

 

14

 to 

140

 °F (–

10

 °C to 

60

 °C)

 

CAUTION: Ensure water is emptied from the Water Chamber before traveling. 

OPERATING CONDITIONS: 

Ambient Temperature:

 

41

 to 

95

 °F (

5

 to 

35

 °C)

 Humidity:

 

15

 to 

95

% Relative Humidity

 Altitude:

 

0

 to 

9

,

000

 ft (

0

 to 

3

,

000

 m)

 

NOTE:

 

Above 

4

,

500

 ft (

1

,

500

 m) the maximum operating pressure will be 

reduced.

Summary of Contents for ICON




















Reviews: