4150K and 4160K Series
35
Key
Description
Part Number
230
Cap Screw, steel pl (not shown)
Types 126 & 127
1C5958 24052
231
Pipe Nipple, steel (not shown) (specify quantity req’d)
For casing mounting on Types 126 & 127
W/Types 67FR, 67R, 254, 254F & 1301
11A3740 X012
232
Pipe Tee, steel (not shown)
For casing mounting on Types 126 & 127
W/Types 67R, 254 & 1301
1B8606 X0012
238
Mounting Plate, steel
For yoke-mounted filter regulator
Types 1051, 1052 & 1062 sizes 40 & 60
1C2218 25022
Types 1061 size 30
23A8891 X012
240
Cap Screw, steel
For yoke-mounted filter regulator on
Types 1051 & 1052 sizes 40 & 60 (2 req’d)
1A5534 24052
241
Spacer Spool, steel
For yoke mounted filter regulators on
Types 1051 & 1052 sizes 40 & 60 (2 req’d)
1C5590 24092
242
Spacer Spool, steel (not shown)
For yoke mounting on
Types 1051 & 1052 size 40 (2 req’d)
1V1026 24092
Type 1061 sizes 30, 80 & 100 (2 req’d)
1J8307 24092
243
Street Elbow, pl galvanized malleable iron (not shown)
For mounting on Types 470, 472, 480, 513, 656,
657, 667, panel, pipe stand, 1051, 1052 & 1061
w/nipple-mounted filter regulator
1A9132 21992
Key
Description
Part Number
244
Pipe Nipple, pl galvanized steel (not shown)
For mounting on Types 470, 472, 480, 513, 656,
657, panel, pipe stand, 1051, 1052 & 1061
w/nipple-mounted filter regulator
1D2397 26232
250
Clamp, Steel
For pipe stand mounting (2 req’d)
1P4270 28982
251
Bracket Assembly, steel
For panel or wall mounting (2 req’d)
1H2892 000A2
252
Cap Screw, steel pl
For panel or wall mounting (4 req’d)
1B8480 24052
Note
Specify quantity of fittings.
Connector, Brass
1/8 inch NPT X 1/4 inch od tubing
1A3959 14012
1/4 inch NPT X 1/4 inch od tubing
1A6368 14012
1/4 inch NPT X 3/8 inch od tubing
1B8856 18992
Elbow, Brass
1/8 inch NPT X 1/4 inch od tubing
1A6850 18992
1/4 inch NPT X 1/4 inch od tubing
1A3971 18992
1/4 inch NPT X 3/8 inch od tubing
1B8846 18992
Key 62* Bourdon Tube
PRESSURE RANGE
MATERIAL
Psig
kPa
Stainless Steel
K-Monel
(1)
0–30
0–60
0–100
0–200
0–200
0–400
0–700
0–1400
32B1243X012
32B1243X022
32B1243X032
32B1243X042
---
---
---
---
0–300
0–600
0–1000
0–1500
0–3000
0–2000
0–4000
0–7000
0–10,000
0–20,000
32B1244X052
32B1244X062
32B1244X072
32B1245X082
32B1245X092
---
32B1244X202
32B1244X212
32B1245X222
---
0–5000
0–8000
0–10,000
0–35,000
0–55,000
0–70,000
32B1245X102
32B1245X112
32B1245X122
---
---
1. For NACE applications.
A subassembly with Bourdon tube sensing element as
shown in figure 21 contains the following key numbers:
30 through 37, 39 through 61, 63, 65, 76, and 77.
When ordering the subassembly as indicated by the
table below, one of each of the following key num-
bered parts must also be ordered to complete the sub-
assembly: dial, key 38; Bourdon tube, key 62; and
connecting link, key 64.
Subassemblies with Bourdon Tube Sensing Element
OUTPUT PRESSURE RANGE
FEEDBACK
STANDARD
HIGH
Psig
Bar
FEEDBACK
BELLOWS MATERIAL
STANDARD
HIGH
TEMPERATURE
3 to 15 or 0 and 20
0.2 to 1/0 or 0 and 1.4
Brass
26A7677 X012
26A7677 X022
3 to 15 or 0 and 20
differential gap
0.2 to 1/0 or 0 and 1.4
differential gap
Stainless steel
26A7677 X052
26A7677 X062
6 to 30 or 0 and 35
0.4 to 2.0 or 0 and 2.4
Brass
26A7677 X032
26A7677 X042
6 to 30 or 0 and 35
differential gap
0.4 to 2.0 or 0 and 2.4
differential gap
Stainless steel
26A7677 X072
26A7677 X082
A subassembly with gauge pressure bellows sensing
element as shown in figure 22 contains the following
key numbers: 30 through 37, 39 through 61, 71K, and
71L. The machine screws, key 77, quantity of 2, and
washers, key 76, quantity of 2, also come with the
subassembly. The two washers, key 76, may be used
with the machine screws, key 75, but four washers
and machine screws are required so two more wash-
ers must be ordered. The machine screws, key 77, are
not used on subassemblies with bellows input so they
may be discarded. Although two machine screws, key
71K, and two bearings, key 71L, are included with the-
*Recommended spare parts
