Fischer Panda Panda 14.000 NE PVK-U, Operating Instructions Manual

Page: 11 / 98

The Panda Generator
Panda 14.000 NE PVK-U S00420 - Chapter A: The Panda Generator Page 7
A.2 Detais of functional units
A.2.1 Remote control panel
The remote control panel is equipped with some new monitoring functions, which increases the
operational safety of the generator. A failure message is shown over contacts which are normaly
closed. If a connection is intermitted triggers this a failure message.
Fig. A.1: Remote control panel
Automatic Start Option
An automatic start option is available as an accessory. This includes a separate control board,
which is connected to the main remote control board panel. The Automatic Start Option allows
the generator to be started by means of an external signal (i.e Battery Monitor). A speed gauge
and a sensor for speed pick-up are additionally necessary in addition to the automatic start
option. (See Component Automatic Start)
01 02 03
04
05
08
09 10
11
15 12 13
14
06
07
01. Warning light for coolant temperature
02. Warning light for water leak (sensor optional)
03. Warning light für AC-fault
04. AC-power indicator light
05. Warning light for coil temperature
06. Warning light for oil pressure
07. Battery charge voltage 12V-DC control light
08. Glow plug pre-heat indicator light 09. Glow plug pre-heat button
10. System „START“-button
11. System „START“ light
12. Main power switch „OFF“
13. Main power switch „ON“
14. Indicator light Generator „STAND BY“
15. Hours of operation counter