FIS HDL1, Operating Manual

Page: 25 / 55

- 17 -
GALAXY TELEMETRY
Galaxy Telemetry option configures the data logger telemetry port for communication
with an Inmarsat terminal.
If Galaxy Telemetry is selected, a screen will appear (see Figure 9) that requests the
following information. Note that the fields in this example are for illustration purposes
only, and not necessarily the values you should use.
Figure 9. Telemetry Port Configuration for the Galaxy System
Specifics of each of the Galaxy Telemetry configuration fields are as follows. As
terminology is not consistent between manufacturers, we have shown possible
alternative field names used by manufacturers. For greater detail, consult the manual
for the specific device being using as there are many variations and exceptions.
After entering the relevant information, be sure to press the Send Configuration
button to upload the information into the data logger.
LES NUMBER
Inmarsat assigned Land Earth Station number. This earth station is the destination
for the messages for your ocean region, not that of the final recipient of the message.
DESTINATION SERVICE TYPE (DELIVERY NETWORK)
This specifies the type of land link between the receiving land earth station and the
final destination.
Common values are given in the table below:
TELEX 0
PSTN 1
PSDN 3
Closed Network 5
Special Access Code 6
Use 3 for mobile to mobile binary data.