FIS HDL1, Operating Manual

Page: 23 / 55

- 15 -
GOES / GPS TELEMETRY
GOES/GPS Telemetry option configures the data logger telemetry port for
communication with a GOES Transmitter. This is the configuration option required to
configure the HDL1-G5 s internal transmitter.
If GOES/GPS Telemetry is selected, a screen will appear (see Figure 8) that
requests the following information. Note that the fields in this example are for
illustration purposes only, and not necessarily the values you should use.
Figure 8. Telemetry Port Configuration for the GOES Satellite System
Specifics of each of the GOES/GPS Telemetry configuration fields are as follows.
After entering the relevant information, be sure to press the Send Configuration
button to upload the information into the data logger.
NESID
This is the 8 digit data collection platform address assigned by NESDIS.
G3
This button is selected if the GOES transmitter is a G3 model.
G4 / G5 HDR
This button is selected if the GOES transmitter is a G4 or G5 model.