USER INPUT NUMBER
Use to enable or disable the use of a pressure sensor (transducer). Press to con
fi
rm.
3
Use to enable or disable the use of a Normally Closed contact for the autostart input. Press to con
fi
rm.
AUTOSTART NC
3
Use to select input used for user de
fi
ned option. Press to con
fi
rm.
3
PRESSURE SENSOR
3
Use to set the input for low suction pressure option. Press to con
fi
rm.
LOW SUCTION
NOTE: This is a factory set parameter and under normal circumstances would never be changed.
FACTORY
CONFIGURATION
OPTIONS
3
This is area where ordered options are added by the factory. Any user de
fi
ned parameters for these options would ap-
pear in the SETTING/OPTION SETTINGS menu.
FACTORY
CONFIGURATION
ADC CALIBRATION
This area displays the values of the Analog to Digital Converter calibrations. This calibration is done by the manufac-
turer. Any changes to these settings would have to be made by the factory.
4
Configuration - Options
Configuration - ADC Calibration
1
SCREEN SAVER
Use arrows to enable or disable the screen saver function. Press to con
fi
rm.
NOTE: The display screen is designed to automatically dim 5 minutes after returning to the home screen and without
any activity. The screen will “wake up” or return to set brightness on a key press or any event that would cause a mes-
sage to appear on the screen. This feature is designed to prolong the life of the display. It is not recommended that
this function be disabled.
LAMP TEST
1
Use arrows to enable the lamp test. Press to begin test. All System Status LED’s should illuminate.
Use arrows to disable the lamp test. Press to end test. System Status LED’s should turn off and
return to normal indications.
FACTORY
DIAGNOSTICS
RAW INPUT: ANALOG
Input values are shown. This information is for factory level troubleshooting purposes.
RAW INPUT: DISCRETE
Input values are shown. This information is for factory level troubleshooting purposes.
RAW INPUT: KEYS
Input values are shown. This information is for factory level troubleshooting purposes.
RAW OUTPUT: DISCRETE
Output values are shown. This information is for factory level troubleshooting purposes.
MARK I
IXG
STARTS
Displays the total number of times the Mark II
XG
has been booted.
Diagnostics
20
