SETTINGS
DATE & TIME
DAYLIGHT SAVING
1
Use arrows to enable or disable automatic Daylight Saving time adjustments. Press to con
fi
rm.
(
DST +
) “Begin” -
HOUR
Use arrows to set number of minutes to adjust for at the beginning or end of Daylight Saving
time. Press to con
fi
rm.
(
+/-
)
Use arrows to set the hour of day that Daylight Saving time begins. Press
to con
fi
rm.
(
DST +
) “Begin” -
DAY
Use arrows to set the day of the month that Daylight Saving time begins.
Press to con
fi
rm.
(
DST +
) “Begin” -
MONTH
Use arrows to set the month of the year that Daylight Saving time begins.
Press to con
fi
rm.
(Example: Hour=2:00, Day=2nd Sun, Month=Mar means Daylight Saving time would begin at 2:00a.m. on the 2nd
Sunday in March)
(
DST -
) “End” -
HOUR
Use arrows to set the hour of day that Daylight Saving time ends. Press to
con
fi
rm.
(
DST -
) “End” -
DAY
Use arrows to set the day of the month that Daylight Saving time ends.
Press to con
fi
rm.
(
DST -
) “End” -
MONTH
Use arrows to set the month of the year that Daylight Saving time ends.
Press to con
fi
rm.
(Example: Hour=2:00, Day=1st Sun, Month=Nov means Daylight Saving time would end at 2:00a.m. on the 1st Sunday
in November)
Timers
SETTINGS
TIMERS
ON DELAY
1
Use arrows to set preferred on delay time. Press to con
fi
rm.
Note: On Delay (also known as sequential start) time, delays the starting of the motor when an automatic call to start is
received.
SETTINGS
TIMERS
MIN RUN/OFF DELAY
1
Use arrows to set timer mode to Minimum Run or Off Delay. Press key and use keys to set
desired time. Press to con
fi
rm.
Note: Minimum Run time will begin when motor starts, Off Delay time will begin when system pressure has been
restored to Stop pressure setting.
SETTINGS
TIMERS
ACCELERATION
2
Use arrows to set motor acceleration time. Press to con
fi
rm.
Note: Motor acceleration time is the time allotted for the motor to reach full speed during reduced voltage starting.
The factory default should not be changed unless directed to by quali
fi
ed service technician. Improper setting may
cause damage to the controller and/or motor. (Acceleration setting only available on reduced voltage starting control-
lers FTA1250, 1300, 1350, 1500, 1800).
SETTINGS
TIMERS
SS BYPASS
2
Use arrows to set Soft Starter Bypass time. Press to con
fi
rm.
Note: The soft start bypass timer will energize the motor using a bypass (across-the-line) contactor if an up to speed
signal is not given by the soft starter within the set time. This setting used only on soft start controllers (FTA1900,
1930)
13
