EXTRAORDINARY MAINTENANCE WORK
REPLACING THE SQUEEGEE BODY RUBBER BLADES
Ensuring the integrity of the squeegee body's rubber blades guarantees better floor cleaning and drying results, as well as a longer service life
for the suction motor. In order to replace the squeegee body's rubber blades, do the following:
1. Extract the vacuum hose (1) from the vacuum nozzle on the squeegee body (
Fig.1
).
2. Completely unscrew the knobs (2) in the squeegee body's pre-assembly (
Fig.2
).
3. Remove the squeegee body from the slits in the squeegee connector (
Fig.3
).
4. Remove the rear rubber blade compression plate, and release the stopper (3) at the rear of the squeegee (
Fig.4
).
5. Remove the rear rubber blade (4) from the squeegee body and replace it with the new one (
Fig.5
).
6. Completely unscrew the knobs (5) in the squeegee body's pre-assembly (
Fig.6
).
7. Remove the front rubber blade (6) from the body inside the squeegee and replace it with the new one (
Fig.7
).
8. Repeat the operations in reverse order to reassemble all the parts.
N.B.:
Before using the machine, remember to adjust the squeegee body: see the section entitled “ADJUSTING THE SQUEEGEE
BODY’S RUBBER BLADES” on page 35.
N.B.:
It is recommended to replace both squeegee body blades in order to ensure good results when drying the floor.
33
1
2
1
2
3
4
5
3
4
6
7
5
6
8
7
9
9
8
10
10
11
12
11
18
12
13
13
14
15
14
17
15
16
16
21
17
18
19
20
19
20
21
22
24
23
22
23
25
26
27