Fiery ZX-40 Printing Manual Download Page 68

Page: 68 / 81

B-1

Font List

This appendix lists the built-in printer fonts included with your Fiery ZX.

PostScript printer fonts

Listed below are the 136 built-in PostScript printer fonts on the Fiery ZX.

In addition to the fonts listed below, two Adobe Multiple Master fonts are included
and are used for font substitution in PDF files.

OTE

For Mac OS computers, install the corresponding screen fonts from the User

Software CD. For instructions, see Getting Started.

Adobe Type 1 fonts

The Fiery ZX includes 117 Adobe Type 1 fonts:

• AlbertusMT, AlbertusMT-Italic, AlbertusMT-Light

• AntiqueOlive-Roman, AntiqueOlive-Bold, AntiqueOlive-Compact, AntiqueOlive-

Italic

• AvantGarde-Book, AvantGarde-BookOblique, AvantGarde-Demi, AvantGarde-

DemiOblique

• Bodoni, Bodoni-Bold, Bodoni-Italic, Bodoni-BoldItalic, Bodoni-Poster, Bodoni-

PosterCompressed

• Bookman-Demi, Bookman-DemiItalic, Bookman-Light, Bookman-LightItalic

• Carta

• Clarendon, Clarendon-Bold, Clarendon-Light

• CooperBlack, CooperBlack-Italic

• Copperplate-ThirtyThreeBC, Copperplate-ThirtyTwoBC

• Coronet-Regular

• Courier, Courier-Bold, Courier-Oblique, Courier-BoldOblique

• Eurostile, Eurostile-Bold, Eurostile-ExtendedTwo, Eurostile-BoldExtendedTwo

Appendix B:
Font List

Summary of Contents for ZX-40


















































































Search results

Summary of Contents for ZX-40

Reviews:

Related manuals for ZX-40

Brands by name

Popular brands

Fiery ZX-40, Printing Manual

Search results

Summary of Contents for ZX-40

Reviews:

Related manuals for ZX-40

Brands by name

Popular brands