Fiery ZX-40 Printing Manual Download

Page: 45 / 81

4-8

Special Features

For Windows, the sheet dimensions are displayed on the right side of the window.

For Mac OS, you can Option-Click the Preview button to see the layouts without
thumbnail images of the pages to save time.

The number of sheets in the document and the sheet dimensions are displayed below
the thumbnails.

You can also use the Sheet menu at the bottom of the window to view other sheets.

For Windows, you can use the up and down arrows on the right side of the window to
display previous and later pages.

For Mac OS, click the Reduce or Enlarge icons to increase or decrease the sheet size
represented. Click View on Sheet to see the front and back of each sheet.

When you are finished, click OK

Click to display

previous and later

pages

Click to reduce

Click to enlarge

Summary of Contents for ZX-40


















































































Search results

Summary of Contents for ZX-40

Reviews:

Related manuals for ZX-40

Brands by name

Popular brands

Fiery ZX-40, Printing Manual

Search results

Summary of Contents for ZX-40

Reviews:

Related manuals for ZX-40

Brands by name

Popular brands