P
RINT
O
PTIONS
75
Gangup options
Option Information
Gangup
Select On to specify options for speed printing imposition modes.
Gang-up type
Select Step & repeat to speed print a job by printing two document pages on each sheet. When the
printed sheets are cut in half, the result is two complete sets of the same document.
Select Cut & stack to speed print a job by printing two document pages side by side. When the printed
sheets are cut in half and stacked together, the result is one complete set of the document (in faster
printing time).
For more information, see
page 99
.
Paper size:
Paper Size
Paper Size defines the size of the sheet of paper on which your job prints. It is the size of the physical
sheet of paper in the copier tray. To assign Paper Size, do one of the following:
•
Select the size from the available list.
•
Select Custom Paper Size to select a non-standard paper size.
•
Select Same as document size to print one document page per sheet of paper.
The default size is Letter in the U.S. and A4 elsewhere.
For information about Paper size and Document size, see
page 96
.
For information about printing custom page sizes, see
page 95
.
Paper size:
Shrink to fit
Shrink to fit automatically scales down or reduces the document page size to fit the imageable area of
the selected paper size specified from the Paper size menu. Shrink to fit does not scale up or enlarge.
When Shrink to fit is set to Off, page contents print at 100%.
Page alignment:
Increase gutter by
0/-50.0–50.0 mm
(0.1 mm increments)
0/-1.969–1.969 in
(.001 inch increments)
Increase gutter by controls the amount of space between adjacent pages on a sheet to adjust for
trimming or other finishing options.
Specify a positive value to increase the amount of blank space between adjacent pages.
Specify a negative value to decrease the amount of blank space between adjacent pages.
Page alignment:
Duplex
Select Off for single-sided printing.
Specify Head to Head for duplex (double-sided) printing.
For more information, see
page 97
.