Fiery Fiery EX2101, Job Management Manual

Page: 123 / 214

6
6-5 Imposition settings
Creep Adjustment
Choose either Plain or Thick from the Creep Adjustment menu, or enter a value
(between 0 and 2 inches, or the equivalent in another measurement unit) to specify the
thickness of the sheet. When saddle-stitched binding is specified, DocBuilder Pro uses
this value to compensate automatically for binder’s creep (see
“Shingling and creep” on
page A-8).
N
OTE
:
Even if you choose Thick from the Creep Adjustment menu, your job prints on
Plain paper, unless you specified Thick paper in the job properties. For more
information on changing job properties from Command WorkStation, see
“Viewing
and overriding print settings” on page 3-14.
Orientation
Use the Orientation menu to specify the orientation of a sheet. As an alternative to
rotating the sheet, you can perform custom rotations on any page in the main window,
as described in
“Rotating pages” on page 6-22.
Duplex
Use the Duplex menu to specify the relationship of content areas on opposing sides of
a sheet. Specify On for duplex (two-sided) printing or Off for simplex (one-sided)
printing.
When you choose On, the job is printed as duplex using a Top-Top setting, meaning
that the tops of pages on opposing sides of a sheet are located on the same edge (usually
the preferred choice for imposed book layouts).