Fiery Fiery EX2101 Page 172 Job Management Manual Download

Page: 172 / 214

8-4

Using FieryBar

Starting and shutting down the Fiery EX2101

Generally, you can leave the Fiery EX2101 running all the time. This section describes
how to shut down and restart the Fiery EX2101 when necessary.

START

THE

IERY

EX2101

Press the power button on the front of the Fiery EX2101. If the copier is also turned
off, turn it on before turning on the Fiery EX2101.

At the Log On to Windows prompt on the monitor, keep Administrator in the user
name field, enter Fiery.1 in the password field, and press Enter.

Allow FieryBar to appear and reach Idle on the monitor.

When FieryBar displays Idle, you can enter Fiery EX2101 Setup by right-clicking
FieryBar and choosing Set Up Fiery from the menu that appears.

The Setup dialog box includes the following tabs:

For information about the Setup options, see the

Configuration Guide

Click

To do this

General Setup

Configure the General Setup options.

Network Setup

Configure the Network Setup options.

Printer Setup

Configure the Printer Setup options.

Summary of Contents for Fiery EX2101























































































































































































































Search results

Summary of Contents for Fiery EX2101

Reviews:

Related manuals for Fiery EX2101

Brands by name

Popular brands

Fiery Fiery EX2101, Job Management Manual

Search results

Summary of Contents for Fiery EX2101

Reviews:

Related manuals for Fiery EX2101

Brands by name

Popular brands