manualshive.com logo in svg

Fiery Fiery EX2101, Job Management Manual, Page: 131 / 214

Share
Download
Fiery Fiery EX2101 Job Management Manual Download Page 131

6

6-13

Imposition settings

Alignment and Offsets

The Alignment and Offsets settings are enabled when you choose Custom from the 
Scale Mode menu in Mixed Page mode. You cannot change Alignment and Offsets 
settings in Fixed Page mode.

The Alignment controls allow you to specify the placement of a page within its 
predefined slot on the sheet. For example, if the page has been scaled smaller than the 
slot, you can align the page to the upper-left corner of the slot by clicking the 
Alignment control corresponding to that position.

You can fine-tune the placement further by entering values (from –5184 to +5184 
points) in the Offsets fields. Offset values are calculated in reference to the alignment 
position, and reset to zero when you specify a new alignment.

Click to specify 
upper-left alignment

Page is aligned in slot

Summary of Contents for Fiery EX2101























































































































































































































Reviews:

No comments