Fiat New 500 Owner'S Handbook Manual Download

Page: 96 / 320

KNOWING THE INSTRUMENT PANEL

Symbol

What it means

SERVICE (SCHEDULED SERVICING) EXPIRED

When the scheduled servicing is nearly due ("scheduled service deadline"), the display will show the

symbol followed by the number of kilometres/miles until the car must be serviced. This is displayed

automatically, with ignition device at ENGINE, when there are 2000 km (or equivalent value in miles)

left before servicing or, for some markets, 30 days left before servicing. It is also displayed whenever

the ignition device is turned to ENGINE or, for some markets, every 200 km (or equivalent value in

miles).

Go to a Fiat Dealership, where the "Service Schedule" operations will be performed and the

message will be reset.

ATTENTION ASSIST SYSTEM FAILURE

The symbol lights up in case of failure of the Attention Assist device. Contact a Fiat dealership as

soon as possible to have the failure repaired.

AUDIO SYSTEM FAILURE

The symbol switches on to report a failure of the sound system.

INTELLIGENT SPEED ASSIST / SPEED LIMITER FAILURE

The symbol switches on in the case of failure of the Intelligent Speed Assist or of the Speed Limiter

device. Contact a Fiat Dealership as soon as possible to have the failure eliminated.

ADAPTIVE CRUISE CONTROL (ACC) FAILURE

(where provided)

The symbol lights up to indicate a failure of the Adaptive Cruise Control (ACC) failure.

Contact a Fiat Dealership.

AUTONOMOUS EMERGENCY BRAKE CONTROL (AEB) SYSTEM FAILURE

The warning light switches on to alert the driver that the Autonomous Emergency Brake Control

(AEB) system is not active due to sensor failure. Contact a Fiat Dealership.

KEYLESS ENTER-N-GO SYSTEM FAILURE

The symbol switches on in the event of Keyless Enter-N-Go system failure.

HIGH-VOLTAGE BATTERY DISCONNECTED

The symbol lights up to indicate that the high-voltage battery is disconnected from the system.

Contact a Fiat Dealership.

Summary of Contents for New 500

































































































































































































































































































































Search results

Summary of Contents for New 500

Reviews:

Related manuals for New 500

Brands by name

Popular brands

Fiat New 500, Owner'S Handbook Manual

Search results

Summary of Contents for New 500

Reviews:

Related manuals for New 500

Brands by name

Popular brands