Fiat New 500 Owner'S Handbook Manual Download Page 271

Page: 271 / 320

269

WEIGHTS

Versions

High Range

Low Range

Unladen weight (with all fluids and without optional

equipment) (kg):

1290

–

Payload including the driver (kg) (*)

400

–

Maximum permitted load (kg) (**)

- front axle:

920

–

rear axle:

840

–

- total:

1690

–

Towable loads (kg)

- braked trailer:

(***)

–

non-braked trailer:

(***)

Maximum load on the ball (braked trailer) (kg):

(***)

(**) If special equipment is fitted (sunroof, etc.) the unladen car weight increases, thus reducing the specified payload in relation to the

maximum permitted loads.

(***) Loads not to be exceeded. The user should carry goods in the boot and/on load carrying platform within the maximum permitted loads.

(****) IMPORTANT A trailer cannot be towed so there are no provisions for fitting a tow hook.

Summary of Contents for New 500

































































































































































































































































































































Search results

Summary of Contents for New 500

Reviews:

Fiat New 500, Owner'S Handbook Manual, Page: 271 / 320

Search results

Summary of Contents for New 500

Reviews: