Fiat New 500 Owner'S Handbook Manual Download Page 193

Page: 193 / 320

191

The presence of this

symbol on the label

indicates that the charge

status control unit does

not have the function of

disconnecting the earthing

cable.

The symbol indicates that

the charging unit should

not be placed in the waste

if it no longer works:

for disposal refer to the

environmental regulations

in force in the country in

which it circulates.

The symbol prompts you

to read the instructions in

this publication carefully

before using the charging

cable.

194

F0S1204

WARNING

202)

The device is to be used exclusively

for charging the car.

203)

Never attempt to make a repair

and/or perform maintenance on the

charge cables, this may result in serious

personal injury or even death. Always go to

a Fiat Dealership.

Summary of Contents for New 500

































































































































































































































































































































Search results

Summary of Contents for New 500

Reviews:

Fiat New 500, Owner'S Handbook Manual, Page: 193 / 320

Search results

Summary of Contents for New 500

Reviews: