Fiat New 500 Owner'S Handbook Manual Download Page 256

Page: 256 / 320

TECHNICAL SPECIFICATIONS

254

IDENTIFICATION

DATA

It is advisable to take note of the

identification codes. The following

identification codes are printed and

shown on the plates:

Vehicle identification number (VIN)

plate.

Chassis marking.

Bodywork paint identification plate

(where provided).

Motor marking.

VEHICLE

IDENTIFICATION

NUMBER (VIN) PLATE

(The label is shown divided into two

parts for reading purposes)
It is applied to the left front pillar

fig. 250.

250

F0S1327

It contains the following information

fig. 251:

251

F0S1301

Name of Manufacturer.

Vehicle type-approval number.

Car identification number.

Maximum authorised weight of car

fully laden.

Maximum authorised weight of fully

laden car plus trailer (field not used).

Maximum permitted weight on first

axle (front axle).

Maximum permitted weight on

second axle (rear axle).

Fiat colour code.

Motor type.

Summary of Contents for New 500

































































































































































































































































































































Search results

Summary of Contents for New 500

Reviews:

Fiat New 500, Owner'S Handbook Manual, Page: 256 / 320

Search results

Summary of Contents for New 500

Reviews: