Fiat New 500 Owner'S Handbook Manual Download Page 85

Page: 85 / 320

Attention Assist warning:

enable, disable.

Mirrors and windscreen wipers

Rain sensor: enable, disable.

Lights

Dipped beam sensitivity: 1 to 3.

Follow me Home: 0, 30, 60, 90

seconds.

Automatic main beam: enable,

disable.

DRL (Daytime Running Lights):

enable, disable.

Cornering lights: enable,

disable.

Dipped beam auto power off:

enable, disable.

Doors & Locks

Automatic locking: enable,

disable.

Automatic unlock on exit:

enable, disable.

Dipped beam when closing:

enable/disable.

Remote door unlocking: all

doors, driver doors.

Passive Entry: enable, disable.

Scheduled charging

Programming settings: list of

days of the week.

Passive Entry: list of days of the

week.

Activate programming: yes, no.

Power level setting: 1 to 5.

Start pairing process: start the

procedure.

Engine shutdown procedure: start

the procedure.

Summary of Contents for New 500

































































































































































































































































































































Search results

Summary of Contents for New 500

Reviews:

Fiat New 500, Owner'S Handbook Manual, Page: 85 / 320

Search results

Summary of Contents for New 500

Reviews: