Fiat Connect Nav+ User Manual Download

Page: 138 / 166

137

CONNECT NA

V+

Fourth example:

User:

Address book -
Delete - Name

CONNECT:

The name, please

User:

Paola

CONNECT:

Do you wish to
delete (Paola)?

User:

Cancel

CONNECT:

The name, please

User:

Elena

CONNECT:

Do you wish to
delete (Elena)?

User:

Yes

CONNECT:

The name has been
deleted.

Storing a destination
in the list of destinations with
voice recognition

The user can insert into the naviga-

tor directory a voice sample associ-
ated to a stored address.

This function cannot be activated by

voice command.

User can stop the dialogue only

pressing front panel key

1-fig. 1

First example:

CONNECT:

The destination,
please?

User: Home.

CONNECT

Please, repeat
the destination.

User:

Home.

CONNECT:

The destination has
been stored.

Second example:

CONNECT:

The destination,
please?

User:

Office Milano.

CONNECT

Please, repeat
the destination.

User:

Milano Office.

CONNECT:

The destination has
not been stored.
The destination,
please.

User:

Office Milano.

CONNECT:

Please, repeat
the destination.

User:

Office Milano.

CONNECT:

The destination has
been stored.

Summary of Contents for Connect Nav+







































































































































































Search results

Summary of Contents for Connect Nav+

Reviews:

Related manuals for Connect Nav+

Brands by name

Popular brands

Fiat Connect Nav+, User Manual

Search results

Summary of Contents for Connect Nav+

Reviews:

Related manuals for Connect Nav+

Brands by name

Popular brands