Fiat Connect Nav+ User Manual Download Page 155

Page: 155 / 166

154

CONNECT NA

V+

Independent driver’s side
door unlocking

IMPORTANT

This setting is pro-

vided on certain car versions only.

To activate/deactivate independent

driver’s side door unlocking.

When this function is on only the dri-

ver’s door will be unlocked.

When this function is off all doors

will be unlocked.

To turn this function on/off, rotate

the knob

15-fig. 1

to select “Inde-

pendent driver’s side door unlocking”
and then press the knob to confirm.

When “

✓

” is displayed the function

is active.

Independent trunk lid opening

To activate/deactivate independent

trunk lid unlocking.

When this function is on, trunk lid

stays locked when the other doors are
unlocked.

When this function is off, trunk lid

is unlocked like the other doors.

To turn this function on/off, rotate

the knob

15-fig. 1

to select “Inde-

pendent trunk lid opening” and then
press the knob to confirm.

When “

✓

” is displayed the function

is active.

To activate and to store settings, se-

lect “OK” by rotating and pressing the
knob

15-fig. 1

SECOND MENU

To open the second menu from the

screen shown in

fig. 162

, select and

confirm “Next menu” by rotating and
pressing the knob

15-fig. 1

The display shows the screen in

fig.

166

To go back to the first menu, select

and confirm “Previous menu” by ro-
tating and pressing the knob

15-fig. 1

Autoclose

IMPORTANT

This setting is only

possible if the car is equipped with the

EASY GO

system (see further details in

chapter

EASY GO

on the Owner Hand-

book to which this Supplement is at-
tached to).

When this function is on, doors are

locked automatically when the CID
(Customer Identification Device)
leaves the car.

When this function is off, doors are

not locked automatically when the
CID leaves the car.

SYSTEM

Vehicle

Previous Menu

Daylight sensor sensitivity

VEHICLE

DATE & TIME

LANGUAGE

fig. 166

F0Q3117f

Summary of Contents for Connect Nav+







































































































































































Search results

Summary of Contents for Connect Nav+

Reviews:

Related manuals for Connect Nav+

Brands by name

Popular brands

Fiat Connect Nav+, User Manual

Search results

Summary of Contents for Connect Nav+

Reviews:

Related manuals for Connect Nav+

Brands by name

Popular brands