145
CONNECT NA
V+
INFOMOBILITY SERVICES
Press button
•
13-fig. 1
to display
screen
fig. 153
to be used for re-
questing services and info. Available
functions are:
– System
– Select.
bConnect
operator availability
(GSM field strength, etc...) is shown on
the left top of the screen, whereas
SMS sent to the
bCONNECT
oper-
ator are listed at the bottom of the
screen.
Services are available only upon sub-
scription. If the user hasn’t subscribed
yet or if
bCONNECT
subscription
expired, then the “Connect” icon is
disabled and screen in
fig. 154
is dis-
played showing “Subscribed services
not enabled”.
User can call the
bCONNECT
op-
erator to get information to (re)acti-
vate the service.
If
bCONNECT
subscription ex-
pired, it is always possible to consult
stored information.
“System” function
Select this function through knob
15- fig. 1
and press it to confirm: the
on-board device will send info request
to the
bCONNECT
Operational
Centre via a pre-configured SMS.
When receiving the request,
bCON-
NECT
will call the user on the car
freehand set. When this phone con-
nection is active the user can request
info to the operator. If the telematic
connection cannot be activated, the
display will show the relevant warning
message. Some information will be giv-
en only vocally by the operator, while
others may also be sent with SMS
messages, that will be received re-
gardless of the function active (MAIN,
AUDIO, etc.). The message will be
shown directly on the screen active at
that moment, in a window
fig. 155
containing the “Save”, “Delete”, “Map”
(if the message contains geographical
indications) and “Call” (if a telephone
number is present).
Choosing “Save” option the message
will be stored, while “Delete” will
clear it from the screen and from
memory.
System
06
Select
BULDING
fig. 153
F0Q3104f
06
User information
Subscribed services not enable
Press sel
informati
Select
fig. 154
F0Q3105f
