46
Festo — YXCF — 2021-07b
Assembly
The premounted bolts
4
define the position of the Y-module in the Z-direction.
• Do not loosen the bolts.
1. On the left and right of the Y-module on the Y-X adapter plates
2
slacken the screws
3
maximum
1 revolution.
4
3
2
2
Ä
The Y-X adapter plates are loosened slightly at the profile of the Y-axis.
2. For parallel and torsion-free alignment of the X-axes:
Slacken the screws for fastening to the mounting surface on an X-axis, preferable the X-axis
without energy chain, approximately 1 revolution.
Apply counter pressure to the adjusting bolts with adjusting kits.
Make sure that there is sufficient backlash in the mounting components of the detached X-axis for
parallel alignment.
