Festo — YXCF — 2021-07b
Assembly
27
EHMX-ELGC-
60
80
G1
M8
Thread depth G1
[mm]
³
13
1) By = width in Y-direction
è
Technical data
2) Hx = stroke in X-direction
è
Technical data
3) n = number of mounting components per X-axis
Tab. 9: Dimensions for adjusting kit for EHMX-ELGC
1. Determine the values of the dimensions X1 and Y1.
2. Check that the mounting surface has the required evenness and parallelism of 0.6 mm/m.
3. Prepare the mounting holes on the mounting surface in accordance with the product dimensions.
With EHMX-ELGC:
The supports of the energy chain and the adjusting kits are mounted on the same slot of the
X-axis. If necessary: move the adjusting kits and change the dimension X2 accordingly.
4. With EHMX-EGC-...-M, motor position centre:
Prepare the mounting for the motor
