80
Festo — YXCF — 2021-07b
Assembly
Mounting X-axis
Product version with EGC axes:
EHMX-EGC-
50
80
120
185
Screw size
M3 x 7
M5 x 16
M8 x 20
M8 x 20
Tightening torque
[Nm]
1.2
5.9
20
20
Tab. 31: EHMX-EGC with mounting kit: screw size and tightening torque
EHMX-EGC-
50
80
120
185
Screw size
M5 x 30
M8 x 40
Tightening torque
[Nm]
5.9
34
Tab. 32: EHMX-EGC with adjusting kit: screw size and tightening torque
Product version with ELGC axes:
EHMX-ELGC-
60
80
Screw size
M5 x 12
Tightening torque
[Nm]
6
Tab. 33: EHMX-ELGC with mounting kit: screw size and tightening torque
EHMX-ELGC-
60
80
Screw size
M8 x 40
Tightening torque
[Nm]
25
Tab. 34: EHMX-ELGC with adjusting kit: screw size and tightening torque
•
Tighten all screws for mounting the X-axis on the mounting surface in accordance with the
mounting component.
Apply counter pressure to the adjusting bolts with adjusting kits.
•
Check the alignment.
Ä
The guides of the X-axes must lie entirely in a theoretical plane with the required flatness.
The required flatness depends on the size.
