Festo SLG-Z Series, Operating Instructions Manual

Page: 23 / 88

SLG−Z−...
Festo SLG−Z−... 0512a English
23
Fitting pneumatic components
S
Connect the pneumatic tubing
1
.
Fitting electric components
Using proximity switches:
S
Place the proximity switches in the groove
3
of the intermediate position module
(Fig.19).
S
Fasten the proximity switches in the end
positions.
There must be a minimum distance L of
10 mm from ferromagnetic parts.
Fitting control components
Please note
The stop lever can destroy the shock absorber when it moves back.
S
Make sure that the slide of the linear drive is outside the swivel range when
the stop lever moves in (e.g. by means of a control delay circuit).
The swivel−in speed of the stop lever exceeds the slide speed of the slide unit
type SLG−... .
Fig.18
1
Fig.19
3
Fig.20
Fe
10mm
ÓÓ
ÓÓ
ÓÓ
ÓÓ
ÓÓ
ÓÓ