MS6(N)-SV-...-E-ASIS
Festo – MS6(N)-SV-...-E-ASIS – 1205NH English
43
For larger screw-in depths, the sub-bases MS6-AG.../AQ... from Festo must be used.
•
Make sure that the compressed air lines are connected correctly.
•
Screw the connectors into the pneumatic ports using appropriate sealing material.
5.2.2
Port 3 (thread size G1 or NPT1)
Exhausting a system through the MS6(N)-SV-...-E-ASIS creates high noise levels. We therefore recom-
mend that you use a silencer.
Caution
Danger of injury due to residual pressure in the system
If a commercially-available silencer is used, the body of the silencer may become
clogged, which can result in reduced exhaust performance and back pressure.
•
Use the safety silencer designed for the product
12 Accessories.
•
Only use a commercially-available silencer if it will be maintained at regular intervals
by service staff and only in combination with a back pressure monitoring system.
•
Screw the silencer into the pneumatic port 3.
Note
For MS6N-SV-...-E-ASIS an adapter (from thread size NPT1 to G1) must also be mounted
between silencer and product.
•
Make sure that there is unrestricted exhausting. Neither the silencer nor port 3 may be blocked.
6
Electrical connection
Caution
Danger of injury from electric shock
•
Create the electrical connection only in a voltage-free status and only by qualified
personnel.
Caution
Only use AS-interface power sources that guarantee reliable electrical disconnection of
the operating voltage in accordance with IEC/DIN EN 60204-1. Observe also the general
requirements for PELV power circuits as per IEC/DIN EN 60204-1.
