Festo IFB05-03, Manual

Page: 7 / 154

Contents and general instructions
V
Festo P.BE−VIFB5−03−EN en 0503e
Intended use
The valve terminal described in this documentation is in
tended exclusively for use as follows:
for controlling pneumatic and electric actuators (valves
and output modules)
for interrogating electric sensor signals through the input
modules.
Please use the valve terminal only as follows:
as intended
in faultless technical condition
without undertaking any modifications.
In conjunction with additional commercially available compo
nents, such as sensors and actuators, the specifiedlimits for
pressures, temperatures, electrical data, torques etc. must be
observed.
Please observe the standards specified in the relevant
chapters and comply with national and localsafety laws and
regulations.
Target group
This manual is directed exclusively at personnel trained in
control and automation technology and who have experience
in installing, commissioning, programming and diagnosing
programmable logic controllers (PLC) and field bus systems.
Service
If you have any technical problems, please contact your local
Festo Service.