Festo IFB05-03, Manual

Page: 45 / 154

3. Installation
3−11
Festo P.BE−VIFB5−03−EN en 0503e
Possible field bus addresses
PLC Address designa
tion Addresses
Festo Field bus address 1; 2; 3; ...; 99
ABB Procontic CS31 module address 0; 1; 2; ...; 60
*)
Klöckner−Moeller − 1; ...; 99
*)
also less, depending on the controller and the size of the valve
terminal (see chapter 4.4)
Proceed as follows:
1. Switch off the operating voltage.
2. Assign an unused field bus address to the valve terminal.
3. Use a screwdriver to set the arrow of the relevant address
selector switch to the tens or units figure of the desired
field bus address.
Example
1
Setting with field
bus address: 05
2
Setting with field
bus address: 38
1 2
UNITS
TENS
UNITS
TENS
Fig.3/4: Function of the address selector switch