Festo HGPPI Series, Instructions Manual

Page: 63 / 192

4. Commissioning
4−19
Festo P.BE−HGPPI−PB−E N en 0605NH
3. Activate the Parameter Assignment" register. Then open
the folder Device−specific parameter".
Set the system parameters.
Fig.4/6: Configuring the slave properties
The system parameters are used by the closed−loop controller
and the sequence control (see Section 5.1.1 System parame
ters). They can also be transferred during running operation
with the functions Read/Write Parameters".
4. Save your settings with the menu command [Station]
[Save and Compile].
5. Load your hardware configuration into the master PLC
with the menu command [PLC] [Download].
6. Close the hardware configuration.